Materials · 2019 · 103 citations · 43 references
EngineeringEnvironmental EngineeringEnvironmental SciencesEnvironmental RemediationWastewater TreatmentWater TreatmentAdsorption ProcessesAdsorptive SeparationsOrganic Contaminant RemovalWastewater BiotreatmentAdsorbent CharacterizationAdsorption IsothermsAdsorption MechanismsAdsorption Of DyesBiosorptionLangmuir Adsorption ModelPhysical AdsorptionWater Contamination
(PMT) found in the Amazon region of Belém state of Pará-Brazil, contribute to the problem of water contamination by the removal of the methylene blue dye through the biosorption process, taking advantage of other materials for economic viability and processing. The influences of parameters such as, biosorbent dose, contact time, and initial concentration of dye were examined. The characterizations were realized using SEM to verify the morphology of the material and spectroscopy in the FTIR region. As for the adsorption mechanism, the physical adsorption mechanism prevailed. The time required for the system to reach equilibrium for both biosorbents was from 50 min, following a kinetics described by the pseudo-second order model. The adsorption isotherm data for PMT were better adjusted to the Langmuir model and the biosorption capacity (qmax) value was (56.1798 mg/g). CCLHR was better adjusted to the Freundlich model and its maximum biosorption capacity was 76.3359 mg/g. Thus, these weed species are promising for the biosorption of methylene blue dye in effluents.
43
Adsorptive removal of methylene blue by tea waste
Md. Tamez Uddin, M. A. Islam, Shaheen Mahmud et al. · Journal of Hazardous Materials · 2008 · 564 citations
Engineering, Chemical Engineering, Environmental Engineering +16
Lu Shang, Tong Bian, Baihui Zhang et al. · Angewandte Chemie International Edition · 2013 · 442 citations
Natural Sciences, Chemical Engineering, Materials Science +17