Sustainability · 2019 · 17 citations · 10 references
EngineeringMechanical EngineeringCombustionHeat TransferThermodynamicsBiomass Burning EmissionsCombustion ProcessesCombustion ThermodynamicsHeat Transfer In FiresBoiler CombustionFire LoadFurnace CombustionMoisture ContentMoisture Content DependenceMoisture Content EffectsThermal Load CalculationWood-burning Emissions
In this paper, we present an analysis on the effect of the moisture content of firewood on the atmospheric thermal load created by the heating of flue gases with temperatures of tfg = 120–200 °C, emitted by a boiler when wood with moisture content of W = 10%–60% is combusted. The load of the atmosphere created by the heat of the flue gases with temperatures of ts = 120 °C from the boiler, where dried wood with the moisture content of W = 10% is combusted, is Q = 9.2 MJ·GJ−1. The atmospheric thermal load caused by flue gases with the temperature of ts = 200 °C, resulting from the combustion process of wet firewood with a moisture content of W = 60%, is 3.8 times higher compared with the above-mentioned conditions. The heating of water vapor from the evaporated water occurring in combusted wood, as well as the heat of the heated nitrogen and unoxidized oxygen in the combustion air delivered to the furnace of a firewood boiler, are considered to be reasons for the increasing atmospheric thermal load caused by the heating of flue gases, resulting from the combustion of wood with higher moisture content.
10
Effect of Wood Fuel on the Emissions from a Top-Feed Pellet Stove
Olli Sippula, Kati Hytönen, Jarkko Tissari et al. · Energy & Fuels · 2007 · 201 citations
Natural Sciences, Environmental Engineering, Environmental Sciences +17