Food Additives & Contaminants Part A · 2018 · 20 citations · 14 references
AgricultureFood ScienceToxicologyFood AnalysisFood ChemistryFood ToxicologyChemical Food SafetyChromatographyContaminant AnalysisFood Safety AnalysisFood Safety AssessmentFood ToxicantsBisphenol ExposureFood Contact ContaminantsFood Contact Material MigrationFood SimulantsLiquid Chromatography-mass SpectrometryLiquid Chromatography-mass Spectrometry AnalysisTandem Mass Spectrometry
A simple, rapid, and novel liquid chromatography tandem-mass spectrometry (LC-MS/MS) method was developed and validated to determine levels of eight bisphenol analogues (A, S, F, B, P, AF, AP, and Z), phenol, and p-tert-butylphenol migrated from food contact material (FCM) into food simulants. Method validation showed acceptable values in terms of linearity, precision, and accuracy. The limits of detection and quantification were 0.53–29.6 and 1.77–29.6 μg L−1, respectively. Water, 4% acetic acid, 50% ethanol, and n-heptane were employed as food simulants for the migration tests, and the proposed method was applied to 234 articles of 11 FCMs including polycarbonate, polyethersulfone, polypropylene, and polyethyleneterephthalate, obtained from domestic markets and manufacturers in Korea. Only phenol was found in the FCMs poly(cyclophexane-1,4-dimethylene terephthalate), polylactide, and thermoplastic polyurethane. Eight bisphenol analogues and p-tert-butyl phenol were not found in any samples. Using the obtained migration results, the estimated daily intake (EDI) of phenol was calculated. Exposure assessments were carried out to compare the EDI with the tolerable daily intake (TDI), showing a low percentage (0.18%) of the TDI reported. This is the first study to examine eight bisphenol analogues and two phenols simultaneously in FCMs using the LC-MS/MS.
14