Sensors · 2018 · 17 citations · 26 references
Natural SciencesChemistryMaterials ScienceBiosensorsSurface ChemistrySurface ScienceAcid-base ChemistryChemical SensorsNanostructured SurfacesPh AnalysisSurface Chemistry Of SolidsSurface PhysicsAnodizationOxidationOxidation TreatmentPh EffectsPh SensingPh SensitivityPh SensorsTerminations
In this paper, we report on the effect of carboxyl- and amine terminations on a boron-doped diamond surface (BDD) in relation to pH sensitivity. Carboxyl termination was achieved by anodization oxidation in Carmody buffer solution (pH 7). The carboxyl-terminated diamond surface was exposed to nitrogen radicals to generate an amine-terminated surface. The pH sensitivity of the carboxyl- and amine-terminated surfaces was measured from pH 2 to pH 12. The pH sensitivities of the carboxyl-terminated surface at low and high pH are 45 and 3 mV/pH, respectively. The pH sensitivity after amine termination is significantly higher—the pH sensitivities at low and high pH are 65 and 24 mV/pH, respectively. We find that the negatively-charged surface properties of the carboxyl-terminated surface due to ionization of ⁻COOH causes very low pH detection in the high pH region (pH 7⁻12). In the case of the amine-terminated surface, the surface properties are interchangeable in both acidic and basic solutions; therefore, we observed pH detection at both low and high pH regions. The results presented here may provide molecular-level understanding of surface properties with charged ions in pH solutions. The understanding of these surface terminations on BDD substrate may be useful to design diamond-based biosensors.
26
Peer Reviewed: Boron-Doped Diamond Thin-Film Electrodes
Jishou Xu, Michael C. Granger, Qing‐Yun Chen et al. · Analytical Chemistry · 1997 · 239 citations
Takeshi Watanabe, Yuki Honda, Kazuhiro Kanda et al. · physica status solidi (a) · 2014 · 117 citations
Natural Sciences, Materials Engineering, Materials Science +17