IEEE Transactions on Magnetics · 2018 · 14 citations · 8 references
Natural SciencesMaterials EngineeringMaterials ScienceMagnetic MaterialsMetallic MaterialsPower ElectronicsAmorphous Magnetic MaterialsAmorphous MaterialsAmorphous SolidsPowder ProcessingPowder TechnologySilicon MaterialsAmorphous Magnetic AlloysAtomizationAtomization ProcessesEddy Current LossesGan-based High-frequency DevicesMagnetic Core MaterialsPower Electronics DevicesSilicon
By introducing the SiC/GaN power devices, the high-frequency switching dc-dc converters are expected to have higher efficiency and lightweight. This paper focuses on the Fe-based amorphous alloy powder (Fe-Si-B-Cr-C based) used in the metal composite bulk magnetic core for high-frequency power inductor and transformer. In terms of eddy-current loss at MHz band or beyond, iron-based metal composites are required to have fine magnetic particles with surface insulation layer. In this paper, the finest amorphous powder with a median diameter of 2.57 μm made by water atomization process was used. In order to fabricate the amorphous powder with surface insulation layer, a surface-modification scheme through the two-step acid solution processing using phosphoric acid and hydrochloric acid was introduced. As a result, the surface-modification scheme enabled to make a single-phase silica thin layer on the surface of the amorphous powder, and the silica thin layer was considered to be derivable from the silicon element in the amorphous (Fe-Si-B-Cr-C based) powder.
8
XPS studies on SiOx thin films
R. Alfonsetti, L. Lozzi, M. Passacantando et al. · Applied Surface Science · 1993 · 340 citations
Natural Sciences, Materials Engineering, Materials Science +7
Kanako Sugimura, Daisuke Shibamoto, Naoki Yabu et al. · IEEE Transactions on Magnetics · 2017 · 44 citations
Engineering, Electrical Engineering, Materials Engineering +17