BioResources · 2018 · 41 citations · 27 references
EngineeringBiomedical EngineeringMaterials ScienceBiocompatibilityBiomaterialsTissue Engineering3D PrintingGelsHydrogelsScaffold DesignScaffold FabricationTissue Engineering Scaffolds3D-printed ScaffoldsCellulose HydrogelsCellulose NanofibersCrosslinkingCrosslinking MechanismsNanofiber-reinforced HydrogelsNanofibersRheological Properties
Gelatin (GEL) obtained from animals is famous for its biocompatibility and biodegradability. However, its poor mechanical properties limits possible applications as bio-inks to fabricate tissue scaffolds through three-dimensional (3D) printing. In this work, a high strength hydrogel based on cellulose nanofibers and GEL (CNF/GEL) was designed for 3D printing. Scanning electron microscopy and breaking strength results indicated that a CNF filling content of 10% was the best content in the CNF/GEL hydrogels. The rheological properties of the samples with different solid contents were investigated, and the 10%-CNF/GEL-5 hydrogel was proposed for 3D printing. Then, a printing strategy with optimal conditions, including a crosslinking procedure for obtaining a 3D scaffold, was proposed. The biocompatibility of G-10%-CNF/GEL-5 was also investigated using CCK-8 and Hoechst 33342/PI double-staining assays. These results confirmed that the 10%-CNF/GEL-5 composite hydrogel has potential to be used as a 3D bio-ink for application in tissue repair.
27
3D bioprinting of tissues and organs
Sean V. Murphy, Anthony Atala · Nature Biotechnology · 2014 · 6.8K citations
Writing in the granular gel medium
Tapomoy Bhattacharjee, Steven M. Zehnder, Kyle G. Rowe et al. · Science Advances · 2015 · 642 citations · Full text