Cylindrical extrusions on A5083 aluminum alloy plate fabricated by friction stir forming

Takahiro Ohashi, Hamed Mofidi Tabatabei, Tadashi Nishihara

AIP conference proceedings · 2017 · 16 citations · 8 references

Concepts

Abstract

This paper reports fabrication of cylindrical extrusions on an aluminum alloy medium gauge plate utilizing friction-stir forming (FSF). A material plate is placed on the die, and friction stirring is conducted on its back surface. The material deforms due to high pressure and heat caused by the friction-stir process, and the die pattern is transferred precisely. The processes have been mainly focused on mechanical joining and microforming; however, they seem hopeful for bulk products as well. The authors applied the process for generating various bulk-product shapes. In this paper, a 3mm-thick JIS A5083P-O aluminum alloy plate was put on a die having 2-9mm-diameter holes, and friction stirring was conducted on its back surface. The material successfully filled the cavities to form the cylindrical extrusions. The authors investigated the volume, the maximum height with different spindle speeds, tool feed rates, and tool passes. A faster spindle speed and lower tool feed rate were found to contribute to taller extrusions. The maximum height of the extrusions was l5.23mm for the 2mm-diameter hole with spot FSF but without tool traveling, i.e., with 0mm/min tool feed. For holes of less than 5mm in diameter, extrusions produced by spot FSF were taller than those produced by FSF with tool travel because the tool plunge contributes to raising forming pressure. However, for hole diameters exceeding 5mm, extrusions produced by FSF with tool traveling were taller than those produced by the former because tool feeding creates greater material volume.

References

8