TAPPI Journal · 2008 · 115 citations · 13 references
PharmacyChemical EngineeringDownstream ProcessingFood ProcessingUpstream ProcessingExtraction TechniquesPulp PreparationBiomass FractionationBrightness ImprovementCooking Time OptimizationKraft PulpingLignocellulosic Biomass RecoveryPulp ExtractionPulping ProcessesWood Pulping
A mild alkaline treatment was applied to aspen chips prior to kraft pulping in order to extract hemicelluloses for use as biofuels. The extraction was performed at 50-90° C, and did not require costly pressurized reaction vessels. It resulted in a recovery of 40-50 kg of hemicellulose per ton of chips, and yielded the same amount of pulp after subsequent pulping of the extracted chips residue, as compared to a control cook. The pre-extraction process requires careful optimization of the pulping process, and allows shorter cooking time and lower chemical charges. Kraft pulps obtained from pre-extracted chips have a slightly higher cellulose/hemicellulose ratio, and demonstrate a small decrease in tensile index (~10%), but improved brightness and shive content. While the hemicellulose yield for this process is low, this problem is outweighed by the fact that pulp properties and pulping yield can be maintained at a high level. The recovered hemicellulose can be concentrated/isolated more easily than furfural-containing smaller fragments obtained by autohydrolysis or dilute-acid treatment.
13
Recent progress in the chemistry of wood hemicelluloses
T. E. Timell · Wood Science and Technology · 1967 · 851 citations
From wood to fuels: Integrating biofuels and pulp production
Arthur J. Ragauskas, Máté Nagy, Dongho Kim et al. · Industrial Biotechnology · 2006 · 251 citations