Journal of sensors and sensor systems · 2016 · 18 citations · 5 references
EngineeringElectrical EngineeringInstrumentationMicroelectronicsThermal AnalysisCalibrationDevice CharacterizationElectrical MeasurementEquipment CalibrationSensor CalibrationTemperature MeasurementAccuracyCurrent MeasurementCurrent Measurement AccuracyMeasurement AccuracyResistorsTemperature DriftThermal Drift CompensationThermal Effects
Abstract. Measurement of electrical current is often performed by using shunt resistors. Thermal effects due to self-heating and ambient temperature variation limit the achievable accuracy, especially if low-cost shunt resistors with increased temperature coefficients are utilized. In this work, a compensation method is presented which takes static and dynamic temperature drift effects into account and provides a significant reduction of measurement error. A thermal model of the shunt resistor setup is derived for this purpose and a suitable calibration method is developed. The correction algorithm is based upon a digital filter bank and is optimized for microcontrollers with low computational complexity. It is implemented in laboratory test equipment for long-term studies on automotive lithium-ion cells. For a 600 A current pulse, it reduces the measurement error from 2 % to less than 0.1 %. Measurements with a real-life testing profile show a reduction of remaining measurement error by 60 %. Statistical results for 100 test systems and long-term drift measurements prove the reliability of the method. The proposed dynamic error correction algorithm therefore allows high measurement accuracy despite the use of low-cost shunt resistors.
5
Paolo Bagnoli, Claudio Casarosa, Mario Ciampi et al. · IEEE Transactions on Power Electronics · 1998 · 215 citations
Nils Lohmann, Patrick Weßkamp, Peter Haußmann et al. · Journal of Power Sources · 2014 · 71 citations
Natural Sciences, Materials Engineering, Materials Science +17