Enhanced Curie temperature of InMnP:Zn—TC∼300K

Yoon Shon, H. C. Jeon, Young S. Park, W. C. Lee, Seung Joo Lee, D. Y. Kim, H. S. Kim, H. J. Kim, Tae Won Kang, Y. J. Park,

Applied Physics Letters · 2004 · 13 citations · 9 references

Concepts

Abstract

P -type bulk InP was prepared by the liquid encapsulated Czochralski method and subsequently diffused with Mn by heat treatment after the evaporation of Mn on top of InP:Zn using a molecular beam epitaxy system. The characteristics of Mn-diffused InMnP:Zn were investigated by an energy dispersive x-ray spectroscopy, photoluminescence, and a superconducting quantum interference device magnetometer measurements. The samples were characterized by transmission electron microscopy and no evidence of secondary phase formation of InMnP:Zn was found. The results of energy dispersive x-ray peak displayed injected concentration of Mn near 3%. The results of photoluminescence measurement showed that optical broad transitions related to Mn appeared around 1.2eV and it was confirmed that the transitions around 1.2eV were Mn-related band by the diffusion of Mn into InP:Zn. Clear ferromagnetic hysteresis loops were observed at 10 and 300K and the temperature-dependent magnetization showed ferromagnetic behavior around 300K, which is caused by carrier-mediated ferromagnetism in InMnP:Zn. It is found that a ferromagnetic semiconductor at room temperature can be formed in diluted magnetic semiconductor based on GaMnN and InMnP additionally co-doped with Mg and Zn, respectively.

References

9