4-bit Bit-Slice Arithmetic Logic Unit for 32-bit RSFQ Microprocessors

Guang-Ming Tang, Takata Kensuke, Masamitsu Tanaka, Akira Fujimaki, Kazuyoshi Takagi, Naofumi Takagi

IEEE Transactions on Applied Superconductivity · 2015 · 64 citations · 19 references

Concepts

Abstract

A 4-bit bit-slice arithmetic logic unit (ALU) for 32-bit rapid single-flux-quantum microprocessors was demonstrated. The proposed ALU covers all of the ALU operations for the MIPS32 instruction set. It processes bit-sliced 32-bit data that are divided into eight slices of 4 bits. The bit-slice approach simplifies the circuit structure and reduces the hardware cost. The ALU uses synchronous concurrent-flow clocking and consists of eight pipeline stages. It was implemented using the 1.0-μm Nb/AlO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</sub> /Nb nine-layer advanced process 2 (ADP2) with a critical current density of 10 kA/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , and fabricated by National Institute of Advanced Industrial Science and Technology (AIST). It consists of 3481 Josephson junctions with an area of 3.09 × 1.66 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . It achieved the target frequency of 50 GHz and a latency of 524 ps for a 32-bit operation, at the designed DC bias voltage of 2.5 mV, via precise control of interconnect delays and clock distribution. Furthermore, it achieved a throughput of 6.25 × 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">9</sup> 32-bit operations per second. All the correct ALU operations with measured DC bias voltage margins of around 10% at 50 GHz were successfully obtained. The proposed ALU can be used for any 4n-bit processing.

References

19