2016 · 40 citations · 6 references
EngineeringMechanical EngineeringMechatronics EngineeringInstrumentationMechatronicsMicroelectromechanical SystemsMems DesignMems ResonatorsMems SensorsMems TestingStructural DampingVibration ControlFeedback CompensationGyroscopesMechanical NoiseMechanical Noise SourcesRig DesignStability CompensationStiffnessThermal Noise
Towards the objective of a rate integrating gyroscope (RIG) without a minimum rate threshold and performance limited only by electrical and mechanical thermal noise, we present our progress on a new, generalized electronic feedback method for the compensation of resonator damping asymmetry (anisodamping) and stiffness asymmetry (anisoelasticity) with a new method of RIG operation using self-precession. This enables overcoming the precession angle-dependent bias error and minimum rate threshold, two issues identified by Lynch for a MEMS RIG [1]. To correct angle-dependent bias, we augment the electronic feedback force of the amplitude regulator with a non-unity gain output distribution matrix selected to correct for anisodamping. Using this method, we have decreased the angle dependent bias error by a factor of 30, resulting a minimum rate threshold of 3.5 dps. To further improve RIG performance, an electronically-induced self-precession rate is incorporated and successfully demonstrated to lower the rate threshold. The RIG's output noise is also evaluated, demonstrating an ARW of 11 mdps/√Hz, similar to rate gyro operation at same amplitude.
6
Disk resonator gyroscope with whole-angle mode operation
Parsa Taheri-Tehrani, Oleg Izyumin, Igor Izyumin et al. · 2015 · 73 citations
Engineering, Electrical Engineering, Mechanical Engineering +14
MRIG frequency mismatch and quadrature control
David D. Lynch · 2014 · 39 citations