Preventing the Formation of Voids in the Rear Local Contact Areas for Industrial-Type PERC Solar Cells

D. Chen, Weiwei Deng, Jian Sheng, Hui Zhu, Ming Zhong, W. Wang, Fangwen Ye, Y. Zhang, H. Shen, Pierre Verlinden

EU PVSEC · 2013 · 13 citations · 0 references

DOIFull text

Open access

Concepts

Abstract

In this paper, methods for the prevention of voids in local Al-BSF PERC solar cells are discussed. The thermodynamics of the formation of local contacts is analyzed. It is shown that reducing the diffusivity and the driving force of Si diffusion into the Al layer are critical factors in void prevention. Two new firing profiles have been designed to overcome the void issue. The first firing process is a two-step procedure. The solar cells are initially heated to a low temperature (for example, 650°C, depending on the melting point of Al paste) allowing some silicon to diffuse into the aluminum layer. The firing temperature is then ramped up to the peak firing temperature. This method is compatible with the co-firing process of the front Ag paste. The void ratio is reduced from 52% (the baseline) to 8%, and the average efficiency of PERC solar cells is improved by an absolute 0.09%. The second proposed firing process is an extension of the first one and consists of a multi-step procedure. As in the first approach, the solar cells are heated at a low temperature (depending on the melting point of Al paste) for a long enough time for the silicon concentration in aluminum to saturate. The temperature is then gradually ramped up. For each step increase in temperature, there is enough time for the silicon concentration to saturate. With this technique, the void ratio can be reduced to nearly 0%. The optimization of the second approach is not yet finalized due to co-firing compatibility issues with the front Ag electrodes. Together with other processes improvements, in pilot production, the local Al-BSF PERC cells have achieved an average efficiency of 19.91% and an independently-measured champion efficiency of 20.54%.