physica status solidi (RRL) - Rapid Research Letters · 2016 · 41 citations · 17 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor MaterialsThin FilmsOptoelectronic MaterialsPhotovoltaic DevicesPhotovoltaic MaterialsSolar Cell MaterialsSolar CellsThin-film MaterialsCarrier RecombinationCharge Carrier RecombinationCharge RecombinationEnergy Conversion EfficiencyPassivationPassivation LayersPhoton AbsorptionPhotovoltaic Efficiency
Decreasing the absorber layer thickness of thin‐film solar cells can be an effective solution for cost reduction of photovoltaic electricity generation. Unfortunately, this reduction leads to detrimental effects such as incomplete photon absorption and increased charge carrier recombination at the rear electrode. To tackle these losses in ultra‐thin 0.5 µm Cu(In,Ga)Se 2 (CIGS) solar cells, we developed different passivation structures made of MgF 2 and Al 2 O 3 at the molybdenum–CIGS interface, leading to localized back contacts. The influence of the distance between those contacts on the cell performance was studied by varying the periodicity of the applied 1D patterns from 6 μm to 30 μm. Thus, an increase in performance was measured for microstructured layers with a periodicity of up to 12 µm. More precisely, a MgF 2 layer yielded an increase in power conversion efficiency (PCE) of up to 9% rel compared to an unpassivated cell design, and a passivation layer comprising Al 2 O 3 led to up to a 5% rel increase in PCE. The gains were primarily attributed to an increased reflectivity of the back contact, while the formation of a negative backside field in the case of Al 2 O 3 might have contributed to this increase by preventing electrons from recombining at the backside interface. Our findings indicate a high lateral conductivity for holes inside the multicrystalline CIGS compound over few tens of micrometres, which allows an independent design of future back contacts and light‐trapping schemes. False‐colour scanning electron microscopy cross‐section picture of a passivated solar cell, with the front contact layers coloured in green, the 0.5 µm CIGS absorber in dark red, the MgF 2 passivation layer in blue, and the Mo back contact in grey. magnified image False‐colour scanning electron microscopy cross‐section picture of a passivated solar cell, with the front contact layers coloured in green, the 0.5 µm CIGS absorber in dark red, the MgF 2 passivation layer in blue, and the Mo back contact in grey.
17
Bart Vermang, Viktor Fjällström, Jonas Pettersson et al. · Solar Energy Materials and Solar Cells · 2013 · 146 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17
Bart Vermang, Jörn Timo Wätjen, Viktor Fjällström et al. · Progress in Photovoltaics Research and Applications · 2014 · 145 citations · Full text