Nature Communications · 2015 · 622 citations · 46 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsCarrier TransportCharge Carrier TransportOrganic SemiconductorsPhotovoltaic DevicesSolar Cell MaterialsSolar CellsBulk Heterojunction Solar CellsCharge ExtractionCharge TransportDrift-diffusion SimulationEnergy Conversion EfficiencyFill FactorOrganic Solar CellsPower Conversion Efficiency
The fill factor, a key solar cell parameter, is poorly understood, hindering targeted efficiency improvements. The study quantifies the competition between charge extraction and recombination using a single parameter θ, showing its direct relation to the fill factor in bulk‑heterojunction solar cells. The authors support the θ parameter with experiments on 15 donor–acceptor pairs and drift‑diffusion simulations varying mobilities, recombination, light intensity, energy levels, and thickness to mimic real conditions. The results unify fill factors across diverse donor–acceptor pairs, explain their dependence on thickness, light intensity, and material properties, and show that achieving >0.8 requires better charge transport and lower recombination.
Among the parameters that characterize a solar cell and define its power-conversion efficiency, the fill factor is the least well understood, making targeted improvements difficult. Here we quantify the competition between charge extraction and recombination by using a single parameter θ, and we demonstrate that this parameter is directly related to the fill factor of many different bulk-heterojunction solar cells. Our finding is supported by experimental measurements on 15 different donor:acceptor combinations, as well as by drift-diffusion simulations of organic solar cells in which charge-carrier mobilities, recombination rate, light intensity, energy levels and active-layer thickness are all varied over wide ranges to reproduce typical experimental conditions. The results unify the fill factors of several very different donor:acceptor combinations and give insight into why fill factors change so much with thickness, light intensity and materials properties. To achieve fill factors larger than 0.8 requires further improvements in charge transport while reducing recombination.
46
A high-mobility electron-transporting polymer for printed transistors
He Yan, Zhihua Chen, Yan Zheng et al. · Nature · 2009 · 3K citations
Natural Sciences, Materials Engineering, Materials Science +14