Journal of Microelectromechanical Systems · 2006 · 70 citations · 11 references
EngineeringMechanical EngineeringActuatorsMicroelectromechanical SystemsOpticsAdaptive OpticsIntegrated OpticsMems ActuatorsMems DesignMems FabricationOptical MemsAdaptive Optics ActuatorsAperture ArraysCurvatureDeformable MirrorsMems MirrorsMirror OpticsOpen-loop CorrectionSurface Micromachined Actuators
Surface-micromachined deformable mirrors that exhibit greater than 10 /spl mu/m of stroke are presented. The segmented arrays described here consist of 61 and 85 hexagonal, piston/tip/tilt mirrors (three actuators each) with diameters of 500 and 430 /spl mu/m, respectively, and fill a 4 mm circular aperture. Devices were packaged in 208 and 256 pin-grid arrays and driven by a compact control board designed for turn-key operation. After metallization and packaging mirror bow is /spl sim/680 nm (/spl lambda//1), but a heat-treatment procedure is proposed for controlling mirror curvature to better than /spl lambda//10. An optical test bed was used to demonstrate basic beam splitting and open-loop aberration correction, the results of which are also presented.
11
Use of a microelectromechanical mirror for adaptive optics in the human eye
Nathan Doble, Geunyoung Yoon, Li Chen et al. · Optics Letters · 2002 · 118 citations
Rapid thermal annealing of polysilicon thin films
Xin Zhang, Tong‐Yi Zhang, Man Wong et al. · Journal of Microelectromechanical Systems · 1998 · 78 citations
Natural Sciences, Materials Engineering, Materials Science +17
Vapor deposition of amino-functionalized self-assembled monolayers on MEMS
Matthew G. Hankins, Paul Resnick, Peggy J. Clews et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 2003 · 48 citations
Natural Sciences, Materials Engineering, Materials Science +16