Fault-tolerant designs for 256 Mb DRAM

Abstract

This paper describes fault-tolerant designs, which have been used to boost the yield of a 286 mm/sup 2/ 256 Mb DRAM with x32 both-ends DQ. The 256 Mb DRAM consists of sixteen 16 Mb units, each containing one 128 Kb row redundancy block. This row redundancy block architecture allows flexible row redundancy replacement, where random faults, clustered faults, and grouped faults can be efficiently repaired. Flexible column redundancy replacement with interchangeable master DQ's (MDQ) is used to allow a 256 b data compression without causing a data conflict, while improving the column access speed by 2 ns. A depletion NMOS bitline-precharge-current-limiter suppresses the current flow which occurs as a result of a wordline-bitline short-circuit to only 15 /spl mu/A per cross fail, avoiding a standby current fail. Consequently, the hardware results show a significant yield enhancement of 16 times relative to the intra-block/segment replacement. Detailed simulation results show that this 256 Mb DRAM allows 275 random faults to be repaired with 5.5% silicon area overhead for 80% chip yield.