Shielded Passive Devices for Silicon-Based Monolithic Microwave and Millimeter-Wave Integrated Circuits

Taesik Cheung, J.R. Long

IEEE Journal of Solid-State Circuits · 2006 · 335 citations · 38 references

Concepts

TL;DR

The paper proposes floating shields for on‑chip transmission lines, inductors, and transformers in silicon CMOS or BiCMOS technologies. Floating shields reduce losses by eliminating the need for explicit on‑chip ground connections and are compatible with deep‑submicron silicon processes without process changes. Experimental results show that floating‑shielded passives achieve Q‑factors of 25–35 (15–40 GHz), more than twice the performance of conventional lines, 35 % higher Q in a 7.4‑nH inductor, reduced parasitic capacitance and increased shunt resistance in bondpads, and enable high‑power 21–26 GHz amplifiers and low‑power 17 GHz image‑reject receivers.

Abstract

This paper introduces floating shields for on-chip transmission lines, inductors, and transformers implemented in production silicon CMOS or BiCMOS technologies. The shield minimizes losses without requiring an explicit on-chip ground connection. Experimental measurements demonstrate Q-factor ranging from 25 to 35 between 15 and 40 GHz for shielded coplanar waveguide fabricated on 10 /spl Omega//spl middot/cm silicon. This is more than a factor of 2 improvement over conventional on-chip transmission lines (e.g., microstrip, CPW). A floating-shielded, differentially driven 7.4-nH inductor demonstrates a peak Q of 32, which is 35% higher than an unshielded example. Similar results are realizable for on-chip transformers. Floating-shielded bond-pads with 15% less parasitic capacitance and over 60% higher shunt equivalent resistance compared to conventional shielded bondpads are also described. Implementation of floating shields is compatible with current and projected design constraints for production deep-submicron silicon technologies without process modifications. Application examples of floating-shielded passives implemented in a 0.18-/spl mu/m SiGe-BiCMOS are presented, including a 21-26-GHz power amplifier with 23-dBm output at 20% PAE (at 22 GHz), and a 17-GHz WLAN image-reject receiver MMIC which dissipates less than 65 mW from a 2-V supply.

References

38