Experience with the new compact MEXTRAM model for bipolar transistors

H.C. de Graaff, W.J. Kloosterman, J.A.M. Geelen, M.C.A.M. Koolen

2003 · 29 citations · 0 references

Concepts

Abstract

The improved performance of the compact bipolar transistor model MEXTRAM is demonstrated by comparison with Gummel-Poon (GP) model calculations and measured DC and high-frequency data. The MEXTRAM model contains extended modeling of the collector epilayer and the inactive region of the base-collector epilayer and the parasitic pnp. It has five internal nodes, whereas the GP model has three. The advantage is a more accurate prediction of the DC behavior and the f/sub t/ fall-off at high currents. The AC small-signal behavior at frequencies >or=f/sub t/ is dominated by the inactive part of the device. If unphysical fit parameters are accepted, the GP model can obtain in the forward mode up to the top of the f/sub t/ nearly as good a fit as MEXTRAM does; the predictive capability, especially for down-scaled devices, however, will remain inferior. This is a very important point for circuit optimization MEXTRAM has been used successfully in this area, e.g. for ECL gates.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>