IEEE Transactions on Information Technology in Biomedicine · 2005 · 204 citations · 10 references
EngineeringMaterials ScienceRehabilitation MedicineBiomechanicsMovement AnalysisSensorsMechanical SensorsSmart TextilesStrain SensorsTactile SensingTextile MaterialsWearable Health TechnologiesElectro-mechanical CouplingPiezoresistive MaterialsPiezoresistive SensingPiezoresistive SensorsPiezoresistive Strain SensorsStrain SensingStrain-sensing GarmentsTextile-based Sensing
This technology is a promising candidate for adherent wearable systems due to its excellent mechanical coupling with the body surface. The paper presents a new strain‑sensor technology for garments and proposes a hardware and computational solution to enable real‑time use, aiming at applications such as rehabilitation therapies. The authors fabricate a conductive mixture spread on fabric to create piezoresistive strain sensors, integrate them into garments such as gloves, and develop a wire‑free readout method and computational approach to mitigate nonlinear response and long settling time. Experimental tests show the glove can record finger movements for rehabilitation, but the sensors exhibit nonlinear response and long settling time, limiting real‑time use.
In this paper, we report on a new technology used to implement strain sensors to be integrated in usual garments. A particular conductive mixture based on commercial products is realized and directly spread over a piece of fabric, which shows, after the treatment, piezoresistive properties, i.e., a change in resistance when it is strained. This property is exploited to realize sensorized garments such as gloves, leotards, and seat covers capable of reconstructing and monitoring body shape, posture, and gesture. In general, this technology is a good candidate for adherent wearable systems with excellent mechanical coupling with body surface. Here, we mainly focused on a sensorized glove able to detect posture and movements of the fingers. It could be used in several fields of application. We report on experimental results of a sensorized glove used as movements recorder for rehabilitation therapies and medicine. Furthermore, we describe a dedicated methodology used to read the output sensors which allowed to avoid using metallic wires for the connections. The price to be paid for all these advantages is a nonlinear electric response of the fabric sensor and a too long settling time, that in principle, make these sensors not suitable for real-time applications. Here we propose a hardware and computational solution to overcome this limitation.
10
E-broidery: Design and fabrication of textile-based computing
E. Rehmi Post, Maggie Orth, Pietro Russo et al. · IBM Systems Journal · 2000 · 619 citations
Kybernetes · 1999 · 346 citations