2002 · 54 citations · 6 references
EngineeringMechanical EngineeringFluid DynamicsMicrofabricationSensorsFlow MeasurementMicrofluidic DevicesMicrofluidic SystemsPressure MeasurementTemperature MeasurementTemperature SensorsFlow Acceleration EffectsHigh-pressure Flow MeasurementIncompressible Viscous FlowMicrochannel FlowMicrofabricated Temperature SensorsSensitivityVolumetric Flow MeasurementVolumetric Flow Rate
A freestanding microchannel, with integrated temperature sensors, has been developed for high-pressure flow studies. These microchannels are approximately 20 /spl mu/m/spl times/2 /spl mu/m/spl times/4400 /spl mu/m, and are suspended above 80 /spl mu/m deep cavities, bulk micromachined using BrF/sub 3/ dry etch. The calibration of the lightly boron-doped thermistor-type sensors shows that the resistance sensitivity of these integrated sensors is parabolic with respect to temperature and linear with respect to pressure. Volumetric flow rates of NZ in the microchannel were measured at inlet pressures up to 578 psig. The discrepancy between the data and theory results from the flow acceleration in a channel, the nonparabolic velocity profile, and the bulging of the channel. Bulging effects were evaluated by using incompressible water flow measurements, which also measures 1.045/spl times/10/sup -3/N-s/m/sup 2/ for the viscosity of DI water. The temperature data from sensors on the channel shows the heating of the channel due to the friction generated by the high-pressure flow inside.
6
John C. Harley, Yufeng Huang, Haim H. Bau et al. · Journal of Fluid Mechanics · 1995 · 493 citations
Engineering, Aerospace Engineering, Mechanical Engineering +17
Compressible laminar flow in a capillary
Helena Berg, C.A. Ten Seldam, P. S. van der Gulik · Journal of Fluid Mechanics · 1993 · 117 citations
Laminar compressible flow in a tube
Robert K. Prud’homme, Thomas W. Chapman, J.R. Bowen · Flow Turbulence and Combustion · 1986 · 86 citations