Journal of Photopolymer Science and Technology · 1997 · 10 citations · 1 references
Natural SciencesMaterials EngineeringMaterials ScienceOptical MaterialsPolymer ChemistryPolymer MaterialsOptical PolymersPolymer StructurePolymer Thin FilmsChainsPhotopolymer MaterialsPhotopolymer ResinsPhotoresist ChemistrySingle-layer Resist Processing
ArF excimer laser(λ=193nm) lithography is emerging following KrF DUV lithography(λ=248nm ). 193nm lithography has proven its potential for feature sizes down to 0.15μmlines/spaces patterns using high NA(O.6) because of resolution improvement. However, in practical use of ArF technology, there are problems involved in the properties of photoresist. To solve these problems, we synthesized ArF polymer resin, poly(2- (2-hydroxyethyl) carboxylate-5-norbornene / 2-t-butylcarboxylate-5-norbornene/2-carboxylic acid-5-norbomene/Maleic anhydride), all of the main chains are composed of alicyclic unit. 2-(2-Hydroxyethyl) carboxylate-5-norbornene was found as a very suitable adhesion promoter. Using this resist, 0.15μm L/S pattern was obtained at 14mJ/cm2 doses, using an ArF stepper on the developer, 2.38wt% tetramethyl ammonium hydroxide aqueous solution.
1
Dissolution behavior of alicyclic polymers designed for ArF excimer laser lithography
Takeshi Ohfuji, Katsumi Maeda, Kaichiro Nakano et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 1996 · 11 citations
Natural Sciences, Materials Engineering, Materials Science +17