Radiometric correction in laser scanning

Franco Coren, P. Sterzai

International Journal of Remote Sensing · 2006 · 149 citations · 8 references

Concepts

TL;DR

Scanning airborne LiDAR has become an industry‑standard tool for collecting high‑resolution topographic data, widely accepted in scientific and commercial communities. The study presents a method to accurately radiometrically calibrate laser amplitude data in order to produce pseudo‑reflectance maps of the illuminated surface. LiDAR data are processed to obtain point coordinates and backscattering amplitudes, which are then calibrated to generate the pseudo‑reflectance maps. The pseudo‑reflectance maps enable classification of the illuminated target and may improve the overall accuracy of laser data classification.

Abstract

Scanning airborne Light Detection And Ranging (LiDAR) has gained considerable acceptance in both scientific and commercial communities as a tool for topographic measurement, becoming an industry‐standard tool for collecting high‐resolution topographic data. Once processed, the laser scan data consist of a series of values of coordinates of points at which the laser beam has been reflected. In addition to the coordinates for every single reflection, the backscattering amplitude is also recorded. We describe a methodology to achieve an accurate radiometric calibration of the laser amplitude data so as to generate pseudo‐reflectance maps of the surface illuminated by the laser. The pseudo‐reflectance maps have then been used to classify the target illuminated by the laser. The method can be considered as a potential aid to enhance the accuracy of laser data classification.

References

8