BioResources · 2012 · 35 citations · 21 references
Natural SciencesMaterials EngineeringMaterials ScienceCereal ScienceMechanical Behavior Of MaterialsStructural MaterialsAdhesive BondingComposite MaterialsMechanical CharacterizationMechanical TestingStarch ChemistryStrength Of MaterialsMicrostructureStarch AdhesivesStarch Physicochemical PropertiesStarch-based Adhesives
Panels were made from Arundo donax L. particles bonded with different non-modified starches as adhesive without chemical additives by hotpressing at a low temperature (110 C) and pressure (2.6 N/mm 2 ). The experimental panels were tested for their physical and mechanical properties according to the procedures defined by the European Union (EN) Standard. The microstructure of samples was observed by scanning electron microscopy (SEM). Panels manufactured with potato starch had the highest modulus of rupture and modulus of elasticity, meeting the standard for load bearing (grade P4 for indoor use in dry ambient) (EN 312: 2003). Panels made with corn starch and wheat flour, at a 10% level and three pressing cycles met the standard for general uses (grade P1). Panel bonded with rye bran flour achieved the best internal bond strentgh. The water resistance was poor and needs to be improved.
21
Form and functionality of starch
Les Copeland, Jaroslav Blaz̆ek, Hayfa Salman et al. · Food Hydrocolloids · 2008 · 940 citations
Phase transitions of the starch–water system
John W. Donovan · Biopolymers · 1979 · 930 citations
The terminology and methodology associated with basic starch phenomena
William A. Atwell, L. F. HOOD, David R. Lineback et al. · Cereal Foods World · 1988 · 469 citations
Agriculture, Chemistry, Food Science +10