Journal of Physics D Applied Physics · 2011 · 65 citations · 22 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsElectronic MaterialsSemiconductor MaterialsCurrent-voltage CharacteristicsElectrode MaterialsMemristive MaterialsNanoelectronicsSemiconductor NanomaterialsCurrent-voltage RelationsFilamentary Switching MechanismsMemory ArchitectureNonvolatile Memory MaterialsPotential - Current CharacteristicsPulsed Laser DepositionResistive SwitchingSwitching Behavior
The bipolar and unipolar resistive switching (BRS and URS) modes are first observed to coexist in the Au/SrTiO 3 /Pt cell fabricated by pulsed laser deposition. These two switching modes can be activated separately depending on the different current compliance (CC) during the electroforming process: with a lower CC (1 mA) the asymmetric BRS behaviour is measured in the voltage range −1.2 to +1 V, while the URS behaviour is observed with a higher CC (10 mA). On the basis of current–voltage characteristics, the switching mechanisms for the BRS and URS modes are considered as a change in Schottky-like barrier height and/or width at the Au/SrTiO 3 interface and the formation and disruption of conduction filaments, respectively. The conversion between BRS and URS is reversible. Because each switching mode has a specific advantage, selecting the desired switching mode can broaden the application scope of the cell and enable large flexibility in terms of memory architecture.
22
Reproducible resistance switching in polycrystalline NiO films
Sunae Seo, Myoung‐Jae Lee, David H. Seo et al. · Applied Physics Letters · 2004 · 934 citations
Natural Sciences, Materials Engineering, Materials Science +16
Role of Oxygen Vacancies in Cr‐Doped SrTiO<sub>3</sub> for Resistance‐Change Memory
M. Janousch, G. I. Meijer, U. Staub et al. · Advanced Materials · 2007 · 526 citations