Numerical simulations of the electrical characteristics and the efficiencies of single-layer organic light emitting diodes

George G. Malliaras, J. C. Scott

Journal of Applied Physics · 1999 · 193 citations · 22 references

Concepts

TL;DR

The authors use numerical simulations incorporating field‑dependent mobilities, diffusion, and thermionic injection to compute current and efficiency in single‑layer OLEDs, fit carrier mobilities to experimental I–V data, analyze voltage‑dependent current and efficiency, and compare the results with MEH‑PPV device measurements. The study finds that a metal/organic injection barrier below 0.3 eV makes the contact effectively Ohmic, driving a space‑charge‑limited current, and that the recombination zone shifts toward the electrode injecting the lower‑mobility carrier as voltage increases, with numerical predictions matching MEH‑PPV device data.

Abstract

We have used numerical methods to calculate the current and the efficiency of single-layer organic light emitting diodes, taking into account field-dependent mobilities, diffusion, and thermionic injection at the metal/organic interfaces. It is shown that when the barrier for charge injection from the metal to the organic is lower than 0.3 eV, the contact is, for practical purposes Ohmic, supplying the bulk of the organic layer with a space charge limited current. Determination of the carrier mobility by fitting experimental current–voltage data is discussed and the voltage dependence of the current and the efficiency are analyzed. The recombination profile is shown to evolve with voltage, shifting towards the electrode which injects the carrier with the lower mobility. The numerical results are compared with experimental data from poly[2-methoxy,5-(2-ethylhexoxy)-1,4-phenylene vinylene] (MEH-PPV) based devices.

References

22