Efficient thermal error prediction in a machine tool using finite element analysis

Naeem S. Mian, Simon Fletcher, Andrew P. Longstaff, Alan Myers

Measurement Science and Technology · 2011 · 56 citations · 16 references

Concepts

Abstract

Thermally induced errors have a major significance on the positional accuracy of a machine
\ntool. Heat generated during the machining process produces thermal gradients that flow
\nthrough the machine structure causing linear and nonlinear thermal expansions and distortions
\nof associated complex discrete structures, producing deformations that adversely affect
\nstructural stability. The heat passes through structural linkages and mechanical joints where
\ninterfacial parameters such as the roughness and form of the contacting surfaces affect the
\nthermal resistance and thus the heat transfer coefficients. This paper presents a novel offline
\ntechnique using finite element analysis (FEA) to simulate the effects of the major internal heat
\nsources such as bearings, motors and belt drives of a small vertical milling machine (VMC)
\nand the effects of ambient temperature pockets that build up during the machine operation.
\nSimplified models of the machine have been created offline using FEA software and evaluated
\nexperimental results applied for offline thermal behaviour simulation of the full machine
\nstructure. The FEA simulated results are in close agreement with the experimental results
\nranging from 65% to 90% for a variety of testing regimes and revealed a maximum error range
\nof 70 μm reduced to less than 10 μm.

References

16