IEEE Transactions on Very Large Scale Integration (VLSI) Systems · 2014 · 21 citations · 17 references
EngineeringComputer EngineeringElectrical EngineeringAnalog ElectronicsMicroelectronicsSystem-on-chip DesignClock ManagementCmos Circuit DesignDigital Integrated Circuit DesignMixed-signal Integrated Circuit DesignAnalog-to-digital ConversionAnalog-to-digital ConvertersClock DesignDuty Cycle Correction
A system clock with a 50% duty cycle is demanded in high-speed data communication applications, such as double data rate memories and double sampling analog-to-digital converters. In this paper, a wide-range low-cost all-digital duty-cycle corrector (ADDCC) is presented. The proposed ADDCC uses a delay-recycled half-cycle time delay line to reduce the required length of the delay line to half of the input clock period. Thus, it can extend the operating frequency toward a lower frequency with small area cost as compared with the conventional design. The proposed design is implemented in a standard performance 90-nm CMOS process, and the active area is 170 × 170 μm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . The input frequency of the proposed ADDCC ranges from 75 to 734 MHz, and the input duty-cycle ranges from 9% to 86%. The measured output duty-cycle error is less than 1.78%. The proposed ADDCC consumes 4.59 mW at 734 MHz and 0.9 mW at 75 MHz with a 1.0-V power supply.
17
Dongsuk Shin, Janghoon Song, Hyunsoo Chae et al. · IEEE Journal of Solid-State Circuits · 2009 · 66 citations
Engineering, Computer Engineering, Electrical Engineering +17
An all-digital 50% duty-cycle corrector
Yiming Wang, Jinn‐Shyan Wang · 2004 · 52 citations