1994 · 12 citations · 4 references
EngineeringElectrical EngineeringMaterials ScienceMicroelectronicsMicrofabricationMicrowave EngineeringElectron Beam LithographyHigh-frequency Semiconductor DevicesMems FabricationMicrofabrication ProcessesMicrowave Semiconductor DevicesDevice FabricationElectrode FabricationInsertion LossInsertion Loss ReductionMicroelectromechanical Systems TransducersTransducers
Nano-meter lithography technology is very important for high density integrated circuits and higher frequency-range SAW devices. The frequency ranges of mobile communication systems are now in the 1 GHz region and extending to 2-4 GHz. Moreover SAW devices require a frequency range of around 10 GHz. Nano-meter technology below 0.1 μm is required. In this paper, nano-meter fabrication processing with various types of fine lithography technology, electrode fabrication for GHz SAW devices and low-loss filters using unidirectional transducers are described, The lift-off lithography techniques for a 10 GHz SAW IDT using direct wafer electron beam writing are shown. Next, new lithography techniques are reported for a 0.05 μm width IDT with thickness of about 0.03 μm on 128° Y-X LiNbO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> . SAW experimental results on 10 GHz-range SAW conventional interdigital transducers and filters with an insertion loss of around 15 dB are shown. GHz-range SAW devices, low-loss filters and signal processing are also described
4