Journal of The Electrochemical Society · 1977 · 38 citations · 0 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsIntegrated Circuit DesignInterface EngineeringMetal-semiconductor ContactsSemiconductor Device MaterialsSemiconductor InterfacesSinteringContact GeometryContact MaterialsContact ResistanceElectrical Contact ResistanceInterface ResistanceMaterial Property EffectsSilicide Contacts
This paper presents results on the effects of sintering temperature, sintering time, and contact geometry on Al/Si and Al/poly‐Si contact resistance. At sintering temperatures >450°C the resistance of p‐type contacts is virtually constant and independent of time. The resistance of n‐type contacts, particularly to poly‐Si, increases with increasing sintering temperature for . This is attributed to the precipitation of a p‐type (Al‐doped) layer on n‐contacts during sintering. The interface resistance of both Al/Si and Al/poly‐Si contacts is independent of the length of the contact and inversely proportional to the width of the contact.