Design considerations of hyperabrupt varactor diodes

P.J. Kannam, S. Ponczak, J. Olmstead

IEEE Transactions on Electron Devices · 1971 · 21 citations · 8 references

Concepts

Abstract

This paper describes the design calculations and fabrication techniques used to produce hyperabrupt varactor diodes. The computation consists of determining, the doping profile, the capacitance as a function of applied voltage, the breakdown voltage, and the series resistance; allowance is made for the nonlinear variation of mobility with doping density. Fabrication of the retrograded region was accomplished by diffusion from a doped-oxide source. Two groups of diodes were fabricated. The first group had a breakdown voltage V <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">B</inf> of 95 V at 1 µA, a capacitance ratio of 12 over a voltage range of 1 to 40 V ( <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">C_{P1}/C_{P40}=12</tex> ), and a quality factor <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Q</tex> of 60 at an operating level of 3 V and 100 MHz. The corresponding values for the second group were V <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">B</inf> =45 V ( <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">C_{P1}/C_{P40}=4</tex> ) and <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Q</tex> =210. The capacitance tracking capability of these diodes was found to be within 2 percent. These measurements showed excellent correlation with calculated results.

References

8