IEEE Transactions on Microwave Theory and Techniques · 2013 · 20 citations · 27 references
EngineeringElectrical EngineeringMicroelectronicsSemiconductor DevicesSemiconductor MaterialsBipolar Junction TransistorsHigh-frequency Semiconductor DevicesImpedance MatchingModulationNonlinear Circuit AnalysisPower AmplifiersDoherty Power AmplifiersHeterojunction Bipolar TransistorsLinearityLoad ModulationNonlinear Power AmplifiersPower Added EfficiencyPower Amplifier NonlinearityTransistor Nonlinearity
Theoretically, the load modulation of carrier amplifiers in Doherty power amplifiers (PAs) achieves a 3-dB higher gain and a higher power-added efficiency (PAE) at a 3-dB back-off power due to the two times larger load impedance (2R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">opt</sub> ), compared to those at the peak power. In this paper, we analyze the impact of nonlinear C <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">bc</sub> on the gain behavior of heterojunction bipolar transistors (HBT) that shows nearly identical gain and a lower PAE with 2R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">opt</sub> . In the environment, the gain distribution of carrier and peaking amplifiers is explained for the linear operation of the Doherty PA with the imperfect load modulation. We also explore harmonic controls for the Doherty PA using class-F matching network to enhance efficiency at a given back-off power and propose a method using a second-harmonic short circuit at the input of the carrier amplifier to compensate for the signal distortion caused by nonlinear C <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">bc</sub> . To validate the efficiency improvement while achieving high linearity, a Doherty PA is fabricated and tested using a long-term evolution signal having a 10-MHz bandwidth and a 16-quadrature amplitude modulation (16-QAM) 7.5-dB peak-to-average power ratio. The proposed Doherty PA achieves a PAE of 45% and an adjacent channel leakage ratio of -34 dBc at an average output power of 29 dBm. The total consumed power of the proposed PA at this output power represents a reduction by 4.5% and 29%, respectively, to that of a conventional class-F-type Doherty and a class-AB PA.
27
A New High Efficiency Power Amplifier for Modulated Waves
W.H. Doherty · Proceedings of the IRE · 1936 · 1.1K citations