Japanese Journal of Applied Physics · 2013 · 11 citations · 20 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsMemory DevicesNanoelectronicsQuantum Well DevicesQuantum WellsSemiconductor Device MaterialsSemiconductor PhysicsCurrent DensityCurrent-voltage RelationshipMemristive MemoryNanoelectronic Memory DevicesProtective Oxide FilmsProtective Oxide LayersQuantum Well StructuresRandom-access Memory
A novel scheme of resistance switching random access memory (ReRAM) devices fabricated using Si/CaF 2 /CdF 2 /CaF 2 /Si quantum-well structures grown on metal CoSi 2 layer formed on a Si substrate has been proposed, and embryonic write/erase memory operation has been demonstrated at room temperature. It has been found that the oxide-mediated epitaxy (OME) technique for forming the CoSi 2 layer on Si dramatically improves the stability and reproducibility of the current–voltage ( I – V ) curve. This technology involves 10-nm-thick Co layer deposition on a protective oxide prepared by boiling in a peroxide-based solution followed by annealing at 550 °C for 30 min for silicidation in ultrahigh vacuum. A switching voltage of lower than 1 V, a peak current density of 32 kA/cm 2 , and an ON/OFF ratio of 10 have been observed for the sample with the thickness sequence of 0.9/0.9/2.5/0.9/5.0 nm for the respective layers in the Si/CaF 2 /CdF 2 /CaF 2 /Si structure. Results of surface morphology analysis suggest that the grain size of crystal islands with flat surfaces strongly affects the quality of device characteristics.
20
Masakazu Aono, Tsuyoshi Hasegawa · Proceedings of the IEEE · 2010 · 69 citations
M. Watanabe, Yoshifumi Iketani Yoshifumi Iketani, Masahiro Asada · Japanese Journal of Applied Physics · 2000 · 62 citations