Applied Physics Letters · 2006 · 284 citations · 15 references
EngineeringElectrical EngineeringMaterials ScienceOptoelectronicsSemiconductor DevicesSemiconductor MaterialsLight SourcesLight-emitting DiodesOptoelectronic DevicesOxide SemiconductorsP-n JunctionsSemiconductor Device MaterialsElectroluminescenceForward Bias CharacteristicsLight-emitting DevicesMolecular Beam EpitaxyQuenchingQuenching EffectsThermal QuenchingThreshold Voltage
A ZnO p-n junction light-emitting diode (LED) was fabricated on a-plane Al2O3 substrate by plasma-assisted molecular-beam epitaxy. NO plasma activated by a radio frequency atomic source was used to grow the p-type ZnO layer of the LED. The current-voltage measurements at low temperatures showed a typical diode characteristic with a threshold voltage of about 4.0V under forward bias. With increasing temperature, the rectification characteristic was degraded gradually, and faded away at room temperature. Electroluminescence band of the ZnO p-n junction LED was located at the blue-violet region and was weakened significantly with increase of temperature. This thermal quenching of the electroluminescence was attributed to the degradation of the diode characteristic with temperature.
15
Mechanisms behind green photoluminescence in ZnO phosphor powders
K. Vanheusden, W. L. Warren, C. H. Seager et al. · Journal of Applied Physics · 1996 · 3.7K citations
Natural Sciences, Materials Engineering, Materials Science +17
ZnO diode fabricated by excimer-laser doping
Toru Aoki, Yoshinori Hatanaka, D. C. Look · Applied Physics Letters · 2000 · 714 citations · Full text