Electrical and structural properties of semi-insulating polycrystalline silicon thin films

S. Lombardo, S. U. Campisano, F. Baroetto

Physical review. B, Condensed matter · 1993 · 27 citations · 17 references

Concepts

Abstract

Semi-insulating polycrystalline silicon layers with oxygen concentrations ranging from 2 up to 30 at. % O have been prepared by low-pressure chemical vapor deposition. After deposition, the samples were annealed at 920 \ifmmode^\circ\else\textdegree\fi{}C for 30 min. Grain-size distributions, high- and low-frequency dielectric constants were measured, respectively, by transmission-electron microscopy, capacitance, and optical measurements as a function of the oxygen content. The average grain radius decreases with the oxygen content from 15 up to 2.5 nm. The current-voltage characteristics have been measured as a function of temperature in the range 80--450 K and under applied transverse electric fields up to \ensuremath{\approxeq}${10}^{6}$ V/cm. In weak-transverse-field conditions, the current density as a function of temperature shows two thermally activated regions at low and high temperatures, with activation energies of \ensuremath{\approxeq}0.14 and \ensuremath{\approxeq}0.54 eV, respectively. The application of transverse electric fields of the order of \ensuremath{\approxeq}${10}^{6}$ V/cm produces a current enhancement depending upon field intensity, temperature, and oxygen content. The results have been modeled by assuming thermionic emission, tunneling, and Frenkel generation in a long series of Schottky barriers formed at the boundary of the adjacent grains. The best-fit values of the model parameters indicate that for 30 at. % O a continuous ${\mathrm{SiO}}_{2}$ shell, two monolayers thick, surrounds each grain. For lower oxygen contents this shell is discontinuous and the carrier transport parameters change considerably.

References

17