Journal of Micromechanics and Microengineering · 2009 · 38 citations · 14 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsMicrowave EngineeringNanomaterialsElectroless PlatingMicrowave FiltersMicrowave MaterialsPrinting TechniquesConductive InksHigh-frequency ElectronicsInkjet DepositionMicrowave SubstratesSeed Layer DepositionSeed Layer FormationSilver Electroless Plating
In this paper, a method to fabricate radio frequency (RF) circuit structures is described. This method involves inkjet printing of a silver nanoparticle-based ink on a functional substrate material to create the seed track (i.e., the seed layer), onto which copper is subsequently deposited by an electroless plating method, to obtain the desired thickness and conductivity of the RF structures. This process combination was validated by fabricating an S-band filter on a high-frequency substrate and comparing the RF performance of this filter with that of a filter fabricated using the conventional lithography-based method. The adhesion of the circuit structures to the substrate was qualitatively ascertained by the scotch tape test method. The performance of the inkjet-printed-electroless-plated filter was comparable to that of the conventional filter, thus proving the suitability of this novel method for practical RF applications.
14
Capillary flow as the cause of ring stains from dried liquid drops
Robert D. Deegan, Olgica Bakajin, Todd F. Dupont et al. · Nature · 1997 · 6.3K citations
Plasma treatment of polymers for surface and adhesion improvement
Dirk Hegemann, Herwig Brunner, Christian Oehr · Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms · 2003 · 672 citations
Natural Sciences, Materials Engineering, Materials Science +14
Direct writing of copper conductive patterns by ink-jet printing
Bong Kyun Park, Dongjo Kim, Sunho Jeong et al. · Thin Solid Films · 2007 · 548 citations
Natural Sciences, Materials Engineering, Materials Science +6