Quantitative description of dissolution and dissolution inhibition in novolak and other phenolic resins

Tung‐Feng Yeh, Hsiao-Yih Shih, Arnost Reiser, Medhat A. Toukhy, Bernard T. Beauchemin

Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · 1992 · 12 citations · 0 references

Concepts

Abstract

The dependence of the dissolution rates of phenolic resins on the base concentration of the developer can be described by a dimensionless equation based on a membrane model of novolak dissolution [J. P. Huang, T. K. Kwei, and A. Reiser, Macromolecules 22, 4106 (1989) and R. A. Arcus, Proc. SPIE 631, 124, (1986)]. The resin is characterized by a dissolution threshold c0, which is a limiting base concentration below which dissolution no longer occurs, by a scaling exponent n and by a membrane permeability Pr which refers to a developer of base concentration c = 2c0. Under these reference conditions all resins are in a corresponding state and dissolve with the same dimensionless rate of R/Pr = 0.5. The inhibition effect in an inhibitor/resin pair is represented by a plot of log(Ri/R0) against the inhibitor concentration in the resin matrix, where Ri is the rate of dissolution of the inhibited, R0 the rate of dissolution of the pure resin. The slope of this plot is independent of the inhibitor concentration over a reasonable concentration range and may be termed the inhibition factor and used as a measure of the inherent inhibition capability of the inhibitor in the resin. It is termed the inhibition factor. It is suggested that inhibition factors be compared in conditions where the pure resins dissolve at the same rate. In this study we have chosen a rate of 15 μm/min as the standard condition.