Journal of Applied Physics · 1999 · 54 citations · 11 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor MaterialsSpectroscopyDefects In Electronic MaterialsRaman SpectroscopySemiconductor DefectsSemiconductor Device MaterialsSemiconductor PhysicsDiamond Nitrogen-vacancy CentersDiamond SemiconductorsElectronic TransitionsIonizationIonization EnergyPhotoluminescencePhotoluminescence Spectroscopy
We found that very high concentrations (up to 20% vol) of nitrogen in the ethanol/hydrogen gas mixture do not prejudice the diamond quality as determined by Raman spectroscopy. Nitrogen addition also increases the diamond growth rate, as was previously reported at low nitrogen concentrations. We observed that after a second heating cycle in air at temperatures between 300 and 673 K the electrical resistance versus temperature curves of the as-grown films presented a bulk semiconductor behavior. This stabilization was due to the oxidation of the as-grown hydrogenated surface. The electrical ionization energy Ed was found to be in the range of 1.62–1.90 eV corresponding to films produced with 0 to 20% vol nitrogen in the feed. The room temperature photoluminescence spectra of films produced at low nitrogen concentration suggest that Ed results from pure electronic transitions in the nitrogen-vacancy neutral defects; for samples produced with nitrogen concentrations in the range 15–20% vol the Ed values may be due to, among others, GR1 “vibronic” transitions and charged nitrogen-vacancy defects.
11
Optical absorption and luminescence in diamond
John W. Walker · Reports on Progress in Physics · 1979 · 555 citations
Nitrogen and potential<i>n</i>-type dopants in diamond
S. A. Kajihara, Alex Antonelli, J. Bernholc et al. · Physical Review Letters · 1991 · 367 citations
Natural Sciences, Materials Engineering, Materials Science +16
Nitrogen stabilized 〈100〉 texture in chemical vapor deposited diamond films
R. Locher, C. Wild, N. Herres et al. · Applied Physics Letters · 1994 · 248 citations
Natural Sciences, Materials Engineering, Materials Science +13