The Journal of the Acoustical Society of America · 2013 · 12 citations · 24 references
EngineeringBiomedical EngineeringMechanical EngineeringAcousticsMicroelectromechanical SystemsSensorsAcoustic MeasurementAcoustic SensorsDoppler Velocity MeasurementTransducer TechnologyUltrasonicsUltrasound InstrumentationAcoustic VelocityCapacitive Micromachined Ultrasonic TransducersMicroelectromechanical Systems TransducersResonant FrequencyTransducer Array DesignUltrasound Transducer DesignVelocityVelocity Measurement
This paper describes the design, fabrication, modeling, and characterization of a small (1 cm(2) transducer chip) acoustic Doppler velocity measurement system using microelectromechanical systems capacitive micromachined ultrasound transducer (cMUT) array technology. The cMUT sensor has a 185 kHz resonant frequency to achieve a 13° beam width for a 1 cm aperture. A model for the cMUT and the acoustic system which includes electrical, mechanical, and acoustic components is provided. Furthermore, this paper shows characterization of the cMUT sensor with a variety of testing procedures including Laser Doppler Vibrometry (LDV), beampattern measurement, reflection testing, and velocity testing. LDV measurements demonstrate that the membrane displacement at the center point is 0.4 nm/V(2) at 185 kHz. The maximum range of the sensor is 60 cm (30 cm out and 30 cm back). A velocity sled was constructed and used to demonstrate measureable Doppler shifts at velocities from 0.2 to 1.0 m/s. The Doppler shifts agree well with the expected frequency shifts over this range.
24
Poisson's ratio values for rocks
Hasan Gerçek · International Journal of Rock Mechanics and Mining Sciences · 2006 · 803 citations
Engineering, Earth Sciences, Geology +10