Applied Physics Letters · 1991 · 101 citations · 5 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsThin FilmsFerroelectric MaterialsInfrared DetectorsSemiconductor Device MaterialsSensor MaterialsSilicon MaterialsChoppingPolycrystalline SiliconPyroelectric DetectorsPyroelectric MaterialsPyroelectric PropertiesPyroelectricitySilicon Wafer ProcessingSol-gel Materials
Lead titanate (PbTiO3) thin-film pyroelectric infrared detectors have been fabricated on polycrystalline silicon micromechanical membranes. Pyroelectric PbTiO3 thin films of thickness ranging from 0.2 to 0.6 μm were prepared by sol-gel spin casting techniques and deposited on 1.0-μm-thick polycrystalline silicon membranes suspended 1.0 μm above the surface of a silicon wafer. This composite structure offers high sensitivity and low thermal mass. The measured pyroelectric coefficient for 0.36-μm-thick PbTiO3 films is 90 nC/cm2 K. The measured blackbody voltage responsivity for a pyroelectric element with an active area of 7×10−4 cm2 at 297 K and a chopping frequency of 50 Hz is 4.2×104 V/W. The measured normalized detectivity D* at 297 K and 50 Hz is 1.0×109 cm Hz1/2/W.
5
Ryoichi Takayama, Yoshihiro TOMITA, Kenji Iijima et al. · Ferroelectrics · 1991 · 99 citations
Natural Sciences, Materials Engineering, Materials Science +17
PbTiO<sub>3</sub>ferroelectric thin film gate fet for infrared detection
Masanori Okuyama, Y. Matsui, Hiroyuki Nakano et al. · Ferroelectrics · 1981 · 59 citations