Applied Physics Letters · 2001 · 58 citations · 10 references
SemiconductorsMaterials ScienceElectrical EngineeringElectronic DevicesEngineeringWide-bandgap SemiconductorPhysicsSurface ScienceApplied PhysicsRoom-temperature Ohmic ContactAluminum Gallium NitrideSchottky BarrierGan Power DeviceSurface TreatmentFermi LevelPlasma TreatmentCategoryiii-v SemiconductorPlasma Etching
A room-temperature Ti/Al Ohmic contact on n-type GaN was obtained by surface treatment using Cl2 inductively coupled plasma treatment. The specific contact resistivity was dramatically decreased from the Schottky behavior to 9.4×10−6 Ω cm2 by the treatment. The binding energy of the Ga–N bond and the atomic ratio of Ga/N were simultaneously increased after the plasma treatment. This provides evidence that N vacancies, acting as donors for electrons, were produced at the etched surface, resulting in a shift of the Fermi level near to the conduction band. This leads to the reduction in contact resistivity through the decrease of the Schottky barrier for the conduction of electrons.
10
Handbook of X-Ray Photoelectron Spectroscopy
J. F. Moulder · Medical Entomology and Zoology · 1995 · 23.7K citations
Low resistance ohmic contacts on wide band-gap GaN
Mao Lin, Zhenqiang Ma, Fengyi Huang et al. · Applied Physics Letters · 1994 · 435 citations
Materials Science, Wide-bandgap Semiconductor, Electrical Engineering +10