Journal of Composite Materials · 2008 · 38 citations · 12 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer EngineeringPolymer MaterialsComposite MaterialsHigh-temperature MaterialsMechanics Of Composite MaterialsNanocompositesPolymer CompositesPolymer NanocompositesBlendingElastic ModuliFlexural TestingHigh-density Polymer CompositesSpecific Heat CapacitySpecific Heat DeterminationThermal PropertiesThermodynamics Of Polymer Blends
The date pits flour was used as a filling material in composition with high density polyethylene (HDPE). The blending proportions were: (1) 10% date pits, 90% HDPE; (2) 20% date pits, 80% HDPE; (3) 30% date pits, 70% HDPE; and (4) 40% date pits, 60% HDPE. Thermal conductivities, specific heat, and melt flow index of the blends were determined. The thermal conductivities ranged from 0.460 to 0.720 W/(m°C) and specific heats ranged from 1.10 to 5.30 kJ/(kg°C). The tensile and flexural tests on composite plates, fabricated by compress molding, indicated that strength and strain values decreased with increase in the percentage of date pits. There was no significant difference between flexural moduli of elasticity of the composites, but tensile modulus had the highest value at 30% blend. Moduli of elasticity of the composites were lower than the plates prepared from virgin HDPE at 180°C. It was presumed that high temperature processing of pure HDPE altered its original properties and consequently increased its modulus of elasticity.
12
Date seeds: chemical composition and characteristic profiles of the lipid fraction
Souhail Besbes, Christophe Blecker, Claude Deroanne et al. · Food Chemistry · 2003 · 404 citations