Applied Physics Letters · 1986 · 22 citations · 8 references
Natural SciencesMaterials SciencePhysicsOptical MaterialsOpticsOptoelectronicsElectro-optic EffectsElectro-optic MaterialsOptical CeramicsOptical Properties Of SolidsOptical WaveguidesRare-earth-doped MaterialsChannel WaveguidesConcentrationElectro-optic CoefficientsElectro-optic ModulationPlanar Optical WaveguidesPolarizationWaveguide Electro-opticsWaveguide Materials
Single mode planar and channel waveguides have been produced in Sr0.6Ba0.4Nb2O6 (tungsten bronze structure) by sulfur diffusion in a sealed ampule, followed by oxidation in an open tube. Losses in channel waveguides were ∼15–20 dB/cm for TM polarization and ∼27–32 dB/cm for the TE polarization in z-cut substrates. Electro-optic modulation was observed after poling of the substrate. The experimentally determined value of the effective electro-optic coefficient was slightly greater than reported earlier for bulk samples of SBN:60, and about 15 times greater than for LiNbO3. Based on measurements with the S35 radioisotope, the average atomic sulfur concentration was estimated to be about 4×1017/cm3 in the region extending from the surface to a depth of 2.5 μm, and a significant background concentration (∼5×1016/cm3) was present to depths in excess of 20 μm.
8
Metal-diffused optical waveguides in LiNbO3
R. V. Schmidt, I. P. Kaminow · Applied Physics Letters · 1974 · 662 citations
Guided-wave devices for optical communication
R. C. Alferness · IEEE Journal of Quantum Electronics · 1981 · 273 citations