Applied Optics · 2002 · 27 citations · 9 references
EngineeringElectrical EngineeringInstrumentationMetrologySensorsDisplacement MeasurementInterferometryOptical MetrologyGauge Block MetrologyGauge BlocksHeterodyne InterferometryInterferometric MeasurementInterferometric MetrologyOptical InterferometryStep Height MeasurementTunable Laser Diodes
An interferometer based on the differential heterodyne configuration and wavelength-scanning interferometry for measuring large step heights is presented. The proposed interferometer is less sensitive to environmental disturbances than other interferometers and can accurately measure interference phases. A tunable diode laser is utilized to illuminate the interferometer and thus solve the phase ambiguity problem. Counting the interference fringes as the wavelength is scanned through a known change in wavelength directly determines the step height. Three gauge blocks of different lengths, 5, 10, and 50 mm, are individually wrung on a steel plate to simulate large step heights. Comparing the results measured by the proposed interferometer with those by the gauge block interferometer reveals that the accuracy is approximately 100 nm.
9
Novel geometry for single-mode scanning of tunable lasers
Michael G. Littman · Optics Letters · 1981 · 331 citations
Natural Sciences, Physics, Optics +14
Distance measurement by the wavelength shift of laser diode light
Hisao Kikuta, Koichi Iwata, Ryo Nagata · Applied Optics · 1986 · 164 citations