A capacitance-to-digital converter for displacement sensing with 17b resolution and 20μs conversion time

Sha Xia, Kofi A. A. Makinwa, Stoyan Nihtianov

2012 · 62 citations · 4 references

Concepts

Abstract

In precision mechatronic systems, such as wafer steppers, the position of critical mechanical components must be dynamically stabilized with sub-nanometer precision. This can be achieved by a servo loop consisting of a displacement sensor and an actuator. Compared to optical interferometers, capacitive displacement sensors offer smaller size and lower cost. However, mechanical tolerances limit their electrode spacing to about 10μm [1], while the targeted resolution is below 100pm <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rms</sub> . This requires a capacitance-to-digital converter (CDC) with more than 17b resolution. Furthermore, its latency must be low enough (20μs) to avoid compromising servo-loop stability. Lastly, it should be stable enough to maintain measurement accuracy during the intervals between system calibrations.

References

4