IEEE Transactions on Power Electronics · 2015 · 59 citations · 25 references
EngineeringElectrical EngineeringOptoelectronicsPower ElectronicsSemiconductor DevicesConverter TopologiesDc-dc ConversionDc-dc ConvertersLighting ElectronicsPower Factor CorrectionVoltage RegulationBoost ConvertersBoost Power Factor Correction ConvertersDiscontinuous Conduction Mode OperationLed LightingLight-emitting Diode LightingSaturationSilicon CarbideSliding Mode Control
This paper reports a single-stage grid-supplied boost converter with power factor correction for light-emitting diode (LED)-applications using Silicon-Carbide (SiC) and operating at the boundary between continuous and discontinuous conduction modes to reduce switching losses. The converter is supplied by a 230 VRMS grid voltage, and attains 1200-V dc at the output port, where a-spot of 320 LEDs connected in series is supplied at constant current. The sliding-mode control theory is employed to analyze the switching regulator dynamics, assuring the system stability. The controller is easily implemented by means of a hysteretic comparator avoiding the risk of modulator saturation. The converter can operate in a normal mode, in which all the input current semicycles are employed, and in a burst mode where only a fraction of all the current semicycles is used. The power switch is realized with silicon carbide (SiC) devices to improve the performance of low-power -grid -supplied LED-based lighting systems. The experimental results are in perfect agreement with the theoretical predictions and demonstrate the feasibility of the proposed approach.
25
J. Biela, Mario Schweizer, S. Waffler et al. · IEEE Transactions on Industrial Electronics · 2010 · 863 citations · Full text