Design and testing of the World's first single-level press-pack IGBT based submodule for MMC VSC HVDC applications

Huifeng Chen, Wenping Cao, P. Bordignon, Yi Rong, Haitao Zhang, Wei Shi

2015 · 39 citations · 8 references

Concepts

Abstract

The Modular Multilevel Converter (MMC) based VSC HVDC is an increasingly popular technology worldwide for both engineering installation and academic research purposes over the years. A submodule serves as the basic unit for the MMC, and the typical topology of a submodule is a half bridge configuration. Normally, controllable power devices are used for switches in a submodule, and plastic module IGBT and diodes (PMIs) are common choices. However, PMIs have a relatively short lifetime, since they are prone to bonding wire failure and solder layer fatigue as a result of power and thermal cycling. Another disadvantage of PMIs is their open-circuit failure mode. Thus, it's challenging for PMI based MMC HVDC to meet lifetime and long-term reliability requirements. On the other hand, press-pack IGBT/IEGT (PPI) can offer a much longer lifetime than PMIs, they have the unique short-circuit failure mode (SCFM), and they can carry higher currents. This is due to their special package design, which features double-side cooling and the removal of bonding wire and solder layer. Hence, PPIs are prefect devices for MMC HVDC, especially when power ratings are very high for future systems. The ±160kV/200MW MMC HVDC station is the largest one in the Nan'ao multi-terminal HVDC system, and it's also the world's first MMC HVDC that is based on single-level PPI devices for submodules. It is hoped that this paper provides insight into the design, analysis and testing process of its innovative submodule.

References

8