SAE technical papers on CD-ROM/SAE technical paper series · 1975 · 26 citations · 0 references
EngineeringCivil EngineeringInjury PreventionMovement AnalysisVehicle DynamicsVehicle Safety EngineeringImpact MechanicsInjury BiomechanicsPedestrian Injury PreventionPedestrian SafetyGround Reaction ForcesHigh-speed Pedestrian ImpactsImpact Speed ToleranceImpact ToleranceImpactsPedestrian Impact BiomechanicsPedestrian Impact InjuriesPedestrian Injury Biomechanics
<div class="htmlview paragraph">The overall objective of this experimental investigation of pedestrian/vehicle impacts was to conduct representative impacts of unembalmed cadavers in order to (<span class="xref">1</span>) pioneer the establishment of impact tolerance levels for the pelvis and legs of a standing pedestrian and (<span class="xref">2</span>) explore the ability of a few selected geometry and compliance modifications to the impacting vehicle to increase the impact velocities that can be tolerated. A series of 15 experimental impacts were conducted which covered a speed range from 10 to 30 mph. Dynamic data obtained included high-speed films and time histories of (<span class="xref">1</span>) bumper and hood edge forces, (<span class="xref">2</span>) horizontal and vertical ground reaction forces, and (<span class="xref">3</span>) pelvic acceleration. The resulting injuries were determined from examination of pre- and post-impact X-rays and detailed pathological dissections, and were assessed as to probable temporary total and permanent partial disabilities. Three of the key results are that (<span class="xref">1</span>) injuries to the lower body of an adult pedestrian are strongly dependent upon vehicle design, (<span class="xref">2</span>) the pedestrian leg injury mechanism is a complex dynamic event influenced significantly by both the bumper force and the ground friction force, and (<span class="xref">3</span>) a threshold tolerance value of pelvic acceleration appears to exist below which pelvic injuries do not occur.</div>