IEEE Transactions on Industrial Electronics · 2015 · 311 citations · 20 references
EngineeringAerospace EngineeringSystems EngineeringDynamical SystemsFault ToleranceFault-tolerant SystemsActuator SystemsControl SystemsControl TheoryDigital Signal ProcessingFault-tolerant ControlState EstimationMarkov Jump SystemsNetworked Control SystemsObserver DesignObserver-based Fault-tolerant ControlQuantizationQuantized ControlState Observer DesignState Vector Estimation
This paper investigates the design problem of sliding mode observer (SMO) using quantized measurements for a class of Markovian jump systems against actuator faults. Such a problem arises in modern networked-based digital systems, where data have to be transmitted and exchanged over a digital communication channel. In this paper, a new descriptor SMO approach using quantized signals is presented, in which a discontinuous input is synthesized to reject actuator faults by an offline static compensation of quantization effects. It is revealed that the lower bound on the density of a logarithmic quantizer is 1/3, under which the quantization effects could be compensated completely by using the SMO approach. Based on the proposed observer method, the asymptotical estimations of state vector and quantization errors can be obtained simultaneously. Finally, an example of a linearized model of an F-404 aircraft engine system is included to show the effectiveness of the presented observer design method.
20
A new delay system approach to network-based control
Huijun Gao, Tongwen Chen, James Lam · Automatica · 2007 · 1.1K citations