Journal of Micro/Nanolithography MEMS and MOEMS · 2015 · 13 citations · 21 references
EngineeringBioengineeringMechanical EngineeringActuatorsMicroelectromechanical SystemsMicrofabricationBiofluid MechanicsMicrofluidic DevicesMicrofluidic SystemsMicrofluidicsActuation EfficiencyLorentz Force ActuatorsLorentz Force DynamicsLorentz Force LawLorentz Force MotionMicrofluidic PumpsMicropumpsPumping Frequency
A reciprocating single-chamber micropump is designed and experimentally tested. The actuation technique of the pump is based on Lorentz force acting on an array of low-weight microwires placed on a flexible membrane surface. A square-wave electric current (5.6 and 7.8 A) with a low-frequency range (5.6 to 7.6 Hz) is applied through the microwires in the presence of a perpendicular magnetic field (0.08 to 0.09 T). The resultant oscillating Lorentz force causes the membrane to oscillate with the same frequency, and pushes the fluid to flow toward the outlet using a high-efficiency ball-valve. The micropump has exhibited a maximum efficiency of 2.03% with a flow rate as high as 490 μl/s and back pressure up to 1.5 kPa. Having a high self-pumping frequency of Fsp=32.71/min compared to other micropumps, our proposed pump is suitable for a wide range of applications specifically for biofluid transport.
21
An AC magnetohydrodynamic micropump
Asuncion V. Lemoff, Abraham P. Lee · Sensors and Actuators B Chemical · 2000 · 412 citations
A ferrofluidic magnetic micropump
Adam Hatch, Andrew Evan Kamholz, Gordon D. Holman et al. · Journal of Microelectromechanical Systems · 2001 · 340 citations
Jonathan West, Boris Karamata, Brian J. Lillis et al. · Lab on a Chip · 2002 · 186 citations
Engineering, Chemical Engineering, Mechanical Engineering +17